SD Worldwide Enterprises, Inc. / Firewater

Our combined experience is with the following manufacturers:

PUMPS

Vertical Turbine Pumps:
– Goulds
– Johnston Pump
– Peerless
– Crane Demming
– Floway
– Fairbanks Morse

Horizontal:
– Aurora
– Peerless
– Weinman

Engines:
– Caterpillar
– Clark
– Cummins

All our systems are custom built with the necessary approvals. Other third party approvals are provided per specific project requirements.

We utilize an 8500 square foot under roof fabrication facility with a 10 ton overhead crane, a 5000 square foot partially enclosed in-house painting facility, and a 2500 square foot partially enclosed sandblast facility.

These facilities, in addition to our experience & commitment to service, afford the client full in-house capabilities and a quality product.

TESTING
Vertical Turbine Pit Function Testing involves testing the complete column pipe and bowl assemblies up to 25'-0" in length. For longer sections, we test the pumps with partial column pipe assemblies. Control Panels are fully Factory Tested prior to the Function Test. The scope of testing varies with each end user and is designed to suit specific project requirements & specifications. Following are some sample Testing Procedures.

CONCLUSION
The following analysis indicates this system is free of serious torsional vibration for the normal operating conditions described. Caterpillar does not recommend operating any system under engine misfire conditions.

SYSTEM DATA
– Engine model 3306 rated at 199 bkW,2100 rpm operating speed
– Engine Damper: Caterpillar Part No. 1W4410
– Engine Flywheel: Caterpillar Part No. 7N3496
– Driveshaft: Series 1610
– Gearbox: Randolph Manufacturing G250,
– Right Angle Gear, 6:5 ratio
– Pump: Goulds 14RJMC 5 Stage

SYSTEM DESCRIPTION
The engine is driving a pump through a universal drive-shaft, and speed-reducing right angle gearbox. The system was analyzed at the pump maximum rating of 170 kW at 1760 rpm engine speed.